Blog Posts Tagged ‘kits’

Threadfollower Kangaroo Kit

We recently got in 6 new Threadfollower kits, each featuring it’s own animal design. Today we are going to help you through this precious Kangaroo kit. It is simple, fun and can be completed in an afternoon.

The kit included: beige felt (2 small, 2 large squares), beige embroidery thread, embroidery needle, stuffing, directions, and pattern

You will need: scissors and pins

To start, the directions will help you prepare your thread. This is done very simply by splitting the thread into two 3-ply pieces. Next, pin the pattern to the appropriately sized felt pieces and cut along the edges.

After cutting all your pieces (2 big body, 2 little body, 2 big ears, 2 little ears, 1 tail, 1 pouch, & 1 base), thread your needle and begin by sewing the two large body pieces together, using a whip stitch.

Once you’ve made it almost to the end, place the tail in-between the two body pieces and continue sewing. Refer back to the pattern for placement guidance.

Once the tail is attached, finish stitching the body. After knotting the thread begin stuffing the kangaroo. I cut a smaller piece to push into the head and stuffed the remaining. Don’t forget to leave some out for the baby’s stuffing.

 

Once stuffed, attach the base using a whip stitch. Attach the pouch to the front of the belly, leaving the top open.  Make sure to allow room for the baby to fit in the pouch. I found it easiest to position the pouch by pinning down the sides.

 

Next, add the ears by pinching the pieces together and sewing one on either side. The little baby body is a quick sew. Whip stitch all the way around leaving a small hole to stuff. Once stuffed close off the opening and attach the little ears.

 

 

Lastly, sew the baby’s nose using the brown thread and the mother’s eyes using the black thread. TA-DAH! The sweetest little kangaroo pair. Perfect for any pocket, lunch box, backpack, or windowsill.

 

 

 

 

SaveSave

SaveSave